Bayswater Transflow
MARKET INTELLIGENCE : CAPITAL STRUCTURE & CORPORATE CREDIT

Revolvers, Delayed-Draw Term Loans and Capex Facilities: Matching Availability to Need

An institutional financing guide to designing committed liquidity around working-capital cycles, future acquisitions and staged capital expenditure, with a focus on availability, drawdown conditions, commitment economics and repayment architecture.

Illuminated corporate headquarters boardroom representing revolving credit and delayed draw capex facilities
Bayswater Transaction Intelligence Desk

1. Executive Summary

A company does not experience its financing requirement as a single figure. It experiences it as a sequence of cash demands. Inventory must be purchased before finished goods are sold. Payroll and subcontractors must be paid before customers settle invoices. An acquisition may be expected but not yet signed. A new production line may require a deposit today, progress payments over the next twelve months, and commissioning expenditure only when installation is complete. A business can therefore have a credible requirement for substantial committed liquidity while having no commercial reason to draw all of that capital on the first day.

This distinction between the amount of financing required and the timing at which financing is required is fundamental to institutional credit structuring. A borrower that draws a five-year term loan in full to meet expenditure falling due over the next two years may pay interest on money that remains idle. A borrower that relies on an uncommitted future financing option may discover, precisely when it needs capital, that the lender is not obliged to provide it. A borrower that uses a revolving working-capital line to finance permanent machinery may create a maturity mismatch between a short- or medium-tenor liquidity instrument and an asset whose economic life is materially longer.

The answer is not to select the facility with the most accommodating product name. It is to map each cash requirement to the instrument whose draw mechanics, repayment profile, availability period, collateral package and lender commitment best fit that requirement. Three facilities are particularly important. A revolving credit facility (RCF) is designed for recurring liquidity needs: the borrower may draw, repay and, subject to the agreement, draw again during the availability period. A delayed-draw term loan (DDTL) provides committed term debt that may be drawn at a later date or in agreed instalments, usually for a defined future requirement; once repaid, the funded term amount is ordinarily not available to be borrowed again. A capex facility is financing reserved for capital expenditure. It may be structured as a DDTL, a term facility with staged utilisation, an equipment-backed loan or another agreed form; the label alone does not determine its mechanics.

These instruments can sit alongside an acquisition term loan, a unitranche facility, letters of credit, bank guarantees, equipment finance or asset-based lending. They are often documented in a single facilities agreement but remain distinct commitments with different permitted purposes, utilisation conditions, fees, repayment mechanics and sometimes different lender groups. A well-structured facility package allows the company to obtain funding certainty without unnecessarily funding future expenditure in advance.

The distinction between committed availability and uncommitted capacity is equally important. A signed and binding DDTL commitment, subject to agreed drawdown conditions, is not the same as an accordion provision that merely allows the borrower to request more debt, an incremental debt basket that permits new borrowing subject to lender consent, or an expectation that the existing lenders will refinance the company later. The borrower should know which future funding is contractually committed, which is merely permitted, and which remains dependent on a future credit decision.

This briefing examines the commercial purpose, legal mechanics and underwriting of revolving facilities, delayed-draw term loans and capex facilities. It considers availability periods, drawstop events, borrowing-base limits, utilisation conditions, commitment fees, amortisation commencement, permitted purpose, accordion mechanics, refinancing risk and the interaction between facilities. A worked industrial-company example demonstrates how a $50 million financing package can be divided between recurring working capital, a future acquisition and staged capital expenditure without drawing the entire commitment on day one.

The governing principle is straightforward: finance the cash requirement when it arises, but secure the commitment before the requirement becomes urgent. That is the difference between a financing structure that merely looks available in a presentation and one that has been engineered around the operating and investment cycle of the business.

2. The Financing Problem Is Often Timing, Not Quantum

A corporate financing discussion frequently starts with a headline number: the company requires $40 million, $75 million or $100 million. That number is useful for sizing the mandate, but it is not sufficient to structure the facility. The lender needs to understand when the money is needed, how long it will remain deployed, what event converts the expenditure into an asset or revenue stream, and how the borrower expects to repay or recycle the capital.

Consider three cash requirements that may arise within the same company. First, a manufacturer needs to finance inventory and receivables throughout the year. Its exposure rises when it purchases raw materials, builds finished goods or grants longer payment terms, and falls when customers pay. This is a recurring operating-cycle requirement. Second, the company expects to acquire a smaller competitor in nine months, subject to commercial diligence and regulatory approval. The purchase price is not yet payable, but the borrower wants funding certainty before signing a binding acquisition agreement. This is a future, discrete financing event. Third, the company has approved a three-stage expansion programme involving a plant deposit, equipment delivery and commissioning. The expenditure is known in broad terms, but the cash is payable only when contractual milestones are achieved. These are three different funding patterns, even though each may ultimately be described as corporate debt.

The financing structure should reflect those differences. The working-capital requirement points towards a revolving facility. The future acquisition points towards a committed DDTL or an acquisition-specific facility. The plant expansion points towards a dedicated capex facility, potentially with staged draws tied to invoices, delivery and completion milestones. A single term loan drawn in full at closing may fund all three, but it may be economically inefficient and can create poor alignment between cash availability, interest expense and asset life.

A useful first step is to distinguish the cash requirement curve from the debt balance. The cash requirement curve describes the company’s cumulative need for funding over time. The debt balance reflects actual utilisations, repayments and redraws under the proposed facilities. A lender should not size all committed facilities by simply adding every forecast monthly cash deficit, because a recurring operating requirement may revolve and recycle. Nor should it assume that a future capex commitment can be covered by cash generated from the business if the operating plan already uses that cash to service existing debt.

The core questions are therefore:

  • Is the cash requirement recurring, seasonal, contingent or one-off?
  • Is it tied to working assets, a specific acquisition, a defined capex programme or general liquidity?
  • When is the expenditure expected to occur, and what conditions must be satisfied before it becomes payable?
  • How long will the funded amount remain outstanding?
  • Does repayment restore the ability to borrow again, or is the facility permanently reduced?
  • What evidence should be required before each utilisation?
  • Is the lender legally committed to fund, or does the borrower merely have permission to request additional debt?

The answers determine the facility design. The facility name follows the transaction; it should not dictate the transaction.

3. The Facility Taxonomy: Four Different Forms of Availability

The terms RCF, DDTL, capex facility and accordion are sometimes used loosely in commercial discussions. They should be distinguished carefully because they confer different rights on the borrower and different funding obligations on the lender.

Facility Primary purpose Draw mechanics Re-borrowing after repayment Nature of availability
Revolving credit facility Recurring working capital and liquidity Multiple drawings during availability, subject to commitment and other limits Generally permitted during the availability period Committed, subject to contractual conditions
Delayed-draw term loan A known future or staged funding requirement One or more term-loan drawings during a defined window Generally not permitted after repayment or prepayment Committed if lender funding obligations are binding from inception
Capex facility Eligible capital expenditure Often staged against an agreed capex programme, invoices or milestones Depends on legal structure; frequently non-reborrowable where term debt is drawn May be committed or conditional; the name does not settle the issue
Accordion / incremental facility Potential increase in debt capacity Additional commitments or debt may be requested under agreed mechanics Not applicable until additional debt is actually committed and funded Frequently uncommitted unless lenders are expressly bound to provide the increase

The table describes common commercial structures, not universal legal definitions. Each agreement must be read as drafted. A facility called “Capex Facility” may be a delayed-draw term loan, a revolving capex line, an equipment loan or a dedicated tranche within a broader term-loan agreement. Equally, a facility called “Delayed Draw Facility” may contain a fully committed obligation, or the documentation may allow the borrower only to request that lenders provide a future commitment. The distinction is determined by the operative clauses, not the heading.

The following diagram shows the basic difference between recurring and non-recurring availability:

flowchart TD
    A[Identify the cash requirement] --> B{Does the cash requirement recur?}
    B -->|Yes: operating cycle or seasonal need| C[Revolving credit facility]
    B -->|No: future discrete expenditure| D{Is the use known and agreed now?}
    D -->|Yes| E[Committed DDTL or dedicated capex tranche]
    D -->|Partly known; future option only| F[Accordion or incremental debt capacity]
    C --> G[Draw, repay and redraw subject to availability]
    E --> H[Draw during agreed window; repayment is generally permanent]
    F --> I[Additional lender commitment or future financing decision required]

A further distinction concerns the type of lender exposure. A funded loan creates an outstanding principal balance. An undrawn commitment is a contractual obligation to provide funding if the stipulated conditions are satisfied. A letter of credit or bank guarantee may consume part of a revolving commitment without being a funded cash loan. A borrower may therefore have significant “availability” outstanding even when its balance sheet shows relatively little drawn debt. The credit agreement must define how revolving loans, letters of credit, swingline exposures, ancillary facilities and other credit extensions consume the commitment.

4. Revolving Credit Facilities: Financing the Operating Cycle

4.1 What an RCF is designed to do

A revolving credit facility is designed for liquidity requirements that arise repeatedly. The borrower draws when it needs cash, repays as operating receipts are collected, and may draw again during the availability period. It is therefore suited to the mismatch between the timing of operating expenditure and the timing of customer receipts. The facility is not intended to be a permanent substitute for equity or long-term funding where the business continually carries a structural deficit.

For an industrial business, the cash sequence may be: raw materials are purchased; production costs are incurred; work in progress is accumulated; finished goods are dispatched; the customer receives contractual credit; the invoice is approved; and payment is collected. The company may be profitable throughout this period but still require financing because cash leaves the business well before it returns. A distributor, contractor, logistics business or service provider may face a similar cycle, although the asset base and cash-control structure will differ.

A revolving facility allows that exposure to move with the operating cycle. If a borrower draws $8 million to fund inventory and receivables, and then repays $5 million as collections are received, the repaid $5 million may become available again for a later procurement cycle, provided the commitment remains in force and all contractual conditions continue to be satisfied.

4.2 Cash-flow revolver and asset-based revolver are not the same thing

Not every RCF is an asset-based lending facility. A cash-flow revolver is generally underwritten primarily by the borrower’s enterprise cash generation, liquidity, leverage and overall credit profile. It may be secured by a general security package, but its availability is not necessarily recalculated daily by reference to eligible receivables and inventory.

An asset-based revolver is different. Its availability is often tied to a borrowing base calculated from eligible collateral, such as receivables and inventory, after applying agreed advance rates, exclusions, concentration limits, dilution reserves and other adjustments. The borrower may have a $20 million commitment but be able to draw only $13 million because the borrowing base supports no more than that amount. The amount available is therefore the lower of the contractual commitment and the borrowing-base availability, after deducting outstanding revolving loans, letters of credit, reserves and other exposures as defined in the agreement.

A simplified formula is:

[ \text{Available RCF} = \min(\text{Commitment},\text{Borrowing Base}) - \text{Existing Exposure} ]

The actual contractual formula is normally more detailed. It may include sub-limits, reserves, concentration caps, ineligible receivables, inventory appraisal haircuts, reserves for taxes and unpaid freight, and a minimum availability requirement. The formula must be read from the borrowing-base definition and related schedules.

The Office of the Comptroller of the Currency’s Asset-Based Lending Handbook describes a revolving line as permitting the borrower to draw, repay and redraw during the life of the loan, commonly against receivables and inventory, with repayment arising from the conversion of those working assets into cash. It also discusses lockbox arrangements and controls over collections. These observations are useful for understanding asset-based revolvers, but they should not be treated as a description of every cash-flow RCF. OCC, Comptroller’s Handbook: Asset-Based Lending.

4.3 Commitment size should follow peak need, not average need

A borrower may have an average working-capital requirement of $7 million and a seasonal peak of $14 million. If it secures a $9 million revolver based on the average balance, it may be underfunded at the moment its procurement cycle peaks. Conversely, a $25 million commitment may be unnecessarily expensive if the company has never demonstrated a credible need above $14 million and cannot support the associated fees or lender reporting obligations.

The correct sizing exercise uses monthly or weekly cash-flow forecasts, depending on the volatility of the business. The analysis should identify the peak funding requirement under the base case and a plausible stress case, then distinguish the portion that is eligible for revolving finance from the amount that should be met through sponsor equity, supplier credit, receivables finance or term debt. A seasonal line should be sized for the peak of the operating cycle, not simply its annual average.

A useful discipline is to test whether the facility will naturally reduce as the funded assets convert to cash. If the RCF remains fully drawn throughout the year, the borrower may not have a revolving liquidity problem at all; it may have a permanent working-capital requirement. That may call for a term-out, a larger equity base or a separate working-capital term loan rather than a nominally revolving commitment that never revolves.

4.4 Clean-downs and cash dominion

Some revolving facilities require a “clean-down” period during which the borrower must reduce the outstanding balance to a specified level, or repay it entirely, for a defined period. A clean-down can demonstrate that the facility finances a temporary operating-cycle requirement rather than permanent leverage. It should, however, be calibrated to the business. A seasonal manufacturer with inventory accumulation throughout the year may be unable to achieve a zero-balance clean-down without disrupting operations.

In asset-based structures, cash dominion and collection controls may be important. Debtor receipts may be paid into a controlled account or lockbox, with collections applied to reduce the outstanding revolving balance. The facility may then make availability available again as eligible collateral replenishes. This protects the lender by ensuring that the cash generated by financed assets does not bypass the borrowing-base mechanism. It also affects the borrower’s daily treasury operations and should be understood before signing.

4.5 Letters of credit and ancillary utilisation

An RCF may support letters of credit, bank guarantees, swingline drawings, ancillary working-capital products or cash-management exposures. These facilities are not necessarily funded on issue, but they can consume the commitment or create contingent lender exposure. For example, a $15 million revolving commitment may support $10 million in cash drawings and $3 million in outstanding letters of credit, leaving only $2 million of available capacity before any other contractual adjustments.

A borrower should therefore distinguish cash drawn, contingent exposure and undrawn commitment. Treasury teams should not treat the full headline commitment as immediately available cash if letters of credit, swinglines, fronting exposures or sub-limits already use part of the facility.

5. Delayed-Draw Term Loans: Securing Future Funding Without Taking It Too Early

5.1 The commercial purpose of a DDTL

A delayed-draw term loan gives the borrower access to a term-loan commitment after closing, within an agreed availability period and subject to agreed conditions. The central commercial benefit is that the borrower can obtain funding certainty for a future expenditure without necessarily drawing the full amount on day one. Interest is ordinarily payable only on the amount actually borrowed, while an unused commitment fee and any agreed arrangement or ticking fee compensate the lender for reserving capital.

The structure is useful where the company has a known future requirement but the exact payment date is uncertain or staged. Examples include a permitted bolt-on acquisition, a committed expansion programme, a future refinancing event or a defined strategic investment. In a leveraged buyout, the day-one term loan may fund the purchase price while a DDTL is reserved for future acquisitions or capex. The borrower does not need to borrow the DDTL merely because the acquisition closes; it can access the facility later if the agreed conditions are met.

Proskauer’s analysis of DDTLs describes them as committed facilities that can be drawn after closing on pre-agreed terms, and notes that they may be used for capex, acquisitions or other specified purposes. It also explains that structures vary by transaction and that availability, utilisation, fees and repayment need to be negotiated in the facility agreement. Proskauer, Private Credit Explained: Delayed Draw Term Loans.

5.2 DDTL is term debt, not a revolving line

The key distinction is that a DDTL is generally non-revolving. The borrower may draw in one or more instalments, but once principal is repaid or prepaid, that amount is ordinarily no longer available to be borrowed again. A DDTL therefore finances a discrete use or set of future uses; it is not designed to fund repeated working-capital cycles.

The distinction matters when cash receipts are expected to repay a facility. If the company uses a DDTL to pay for inventory and then collects customer receipts, the repayment may permanently reduce the facility. The next procurement cycle may then require a new loan or refinancing. A revolver would normally be better suited to a recurring asset-conversion cycle because repayment restores availability during the revolving period.

5.3 Commitment from inception versus a future request

The word “delayed draw” does not by itself prove that the lender is committed from the closing date. Some agreements create a binding delayed-draw commitment from inception, under which each lender must fund its agreed share if the utilisation conditions are met. Other agreements contain an uncommitted delayed-draw or incremental mechanism that allows the borrower to ask existing lenders to provide future commitments. Those lenders may be free to decline.

This difference is fundamental. In the first case, the borrower has a contractual funding source, subject to agreed conditions. In the second, the borrower has a negotiation right or an opportunity to request capital, not certainty that capital will be provided. A promoter should not represent an uncommitted DDTL as committed acquisition or capex financing in a board paper, sale agreement or funding plan.

The operative clauses should answer: are lenders required to fund; which lenders are bound; how are their individual commitments allocated; when does the availability period expire; can the borrower draw in multiple tranches; what conditions apply to each drawing; can lenders be replaced or excused; and what happens if a lender fails to fund?

5.4 Purpose and utilisation conditions

A DDTL can be tightly purpose-restricted or broadly drafted. A narrow facility might permit only the acquisition of a named target or the purchase of specific equipment. A broader facility might permit capex, permitted acquisitions, refinancing or other general corporate purposes, subject to the agreement’s negative covenants and leverage limits.

A lender will normally require a utilisation request, evidence of the permitted purpose and confirmation that conditions to draw are met. Depending on the facility, those conditions may include no continuing event of default, repeated representations being true in agreed respects, compliance with a leverage test, delivery of a compliance certificate, satisfaction of a minimum draw amount and payment of fees. If the draw is for an acquisition, the agreement may also require that the acquisition be permitted, that the target and transaction satisfy agreed parameters, that the borrower deliver a funds-flow memorandum, and that the draw be substantially concurrent with completion.

The parties should distinguish the conditions required to establish the commitment from those required to draw it. Initial conditions precedent may include corporate approvals, legal opinions, security perfection documents and financial information. Subsequent utilisations may require only a narrower set of repeating conditions. The borrower should avoid a structure in which the lender can revisit the entire credit decision at each draw, unless that level of discretion is commercially intended and priced.

5.5 Availability period and draw limits

The availability period is the window during which the borrower can make utilisations. It may be measured from the closing date and expire on a specified date, after a stated number of months or on the occurrence of another event. The borrower should consider whether the future use can realistically occur within that window. A facility intended to fund a factory expansion subject to planning approval, imported machinery delivery and customer qualification may need a longer availability period than a facility reserved for an acquisition expected to sign within six months.

The agreement may allow multiple drawings, impose a minimum draw amount, restrict the number of utilisations or set minimum notice periods. Those requirements should fit the commercial cash curve. A minimum drawing of $5 million may be convenient for a lender’s funding operations but commercially awkward for a borrower whose milestone invoices are $1.5 million, $2 million and $2.5 million. The parties should consider whether the minimum draw can be aggregated over a defined period or whether different draw thresholds are appropriate for capex and acquisition utilisations.

6. Capex Facilities: Funding the Asset While It Is Being Created

A capex facility is financing designated for capital expenditure. The phrase does not prescribe one universal legal structure. It may be a delayed-draw term loan, a term facility with staged advances, an equipment loan, a leasing arrangement or a revolving capex line. The facility’s true character depends on its drawdown rights, repayment mechanics, security package, permitted purpose and whether principal can be redrawn after repayment.

The business reason for a dedicated capex facility is that the expenditure is often known before the exact payment schedule is known. Machinery may be paid for against a deposit, factory acceptance test, shipment, delivery, installation and commissioning. A project may require civil works, utilities, specialist equipment and validation over several quarters. If the company borrows the full amount at the start, it may incur interest well before the asset is delivered and capable of generating cash. If it waits until each invoice falls due but has no committed facility, it exposes itself to funding-market risk at each milestone.

A committed capex facility can bridge those two risks. The lender agrees in advance to fund eligible expenditure during a defined period, while the borrower draws only when the agreed milestones or supporting documents are satisfied. The arrangement is more efficient than borrowing the entire facility on day one, but it is not free: the lender is reserving capacity and will usually receive an unused commitment fee, arrangement fee or other compensation.

6.2 Capex eligibility must be carefully defined

The facility should define what qualifies as capex. Depending on the transaction, eligible expenditure may include plant and machinery, tooling, production lines, vehicles, software, automation systems, installation, commissioning, engineering costs and specified project costs. The agreement may exclude maintenance expenditure, ordinary repairs, working capital, shareholder distributions, acquisitions or expenditure that has already been financed elsewhere.

The definition should align with the company’s accounting policies, but accounting classification should not be the only test. A lender may wish to fund tangible productive assets but not capitalised internal overhead or software development. Alternatively, it may accept certain directly attributable project costs if they are supported by a budget and independently verified. The parties should identify whether land, buildings, taxes, duties, freight, installation and contingency costs are eligible.

A vague permitted-purpose clause creates execution friction. If the borrower cannot determine whether a cost qualifies before placing the order, it may find itself committed to a supplier without a reliable funding source. It is generally preferable to agree the eligible capex categories, project budget, approved suppliers or procurement process, evidence requirements and treatment of cost overruns before the facility becomes operational.

6.3 Milestone-based drawdowns

A capex facility may require the borrower to submit a utilisation request supported by supplier invoices, purchase orders, delivery notes, engineer certificates, construction progress certificates, evidence of borrower equity contribution or other agreed documentation. For larger projects, the lender may appoint a technical adviser or independent engineer to certify progress and review cost-to-complete.

The drawdown process should not turn the lender into the project manager. The lender is assessing whether the utilisation complies with the financing documents and whether project risk remains within the agreed parameters. It is not assuming responsibility for design, procurement, construction quality or contractor performance. The borrower and appointed technical advisers remain responsible for project delivery.

Where a facility is intended to fund supplier payments directly, the agreement should specify whether proceeds are paid to the borrower, directly to the supplier or into a controlled project account. Direct payment can reduce diversion risk, but may complicate payment disputes, supplier changes, deposits and refunds. A clear process should deal with rejected deliveries, credit notes, cancelled orders, warranty claims and supplier insolvency.

6.4 Cost overruns, delays and completion risk

The capex facility should be sized against a realistic project budget, not just the headline supplier quotation. The borrower should identify contingency, import duties, freight, installation, utilities, training, integration, validation and working capital required to support the new asset once commissioned. If the lender funds only the machinery invoice but the business has no equity or available liquidity for installation and start-up, the facility may finance an incomplete asset that cannot generate cash.

A lender will typically test the source of any cost overrun. It may require sponsor equity to be injected before additional debt is made available, impose an overrun reserve, reduce the undrawn commitment if project costs fall, or require a fresh credit approval if the project changes materially. The agreement should distinguish overruns within an agreed contingency from a fundamental change in scope, design or commercial assumptions.

Completion risk also affects amortisation. If principal repayment begins before the plant has been commissioned, customer-qualified and ramped to commercial output, the borrower may face debt service before the funded asset generates the expected cash. A more coherent arrangement may provide a construction or availability period, followed by conversion into amortising term debt after a specified date or milestone. That is not an automatic entitlement: the conversion trigger, outside date, completion tests, interest during construction and repayment schedule must be expressly documented.

6.5 Capex finance is not automatically project finance

A corporate capex facility may be supported by the wider company’s balance sheet and cash flow. Project finance is a different underwriting proposition: repayment is ordinarily assessed by reference to the cash flows of a ring-fenced project or project company, supported by project contracts, security over project assets and rights, completion arrangements and risk allocation among project counterparties. A factory expansion financed by a corporate capex facility should not be described as project finance merely because it involves construction and staged disbursements.

The distinction is commercially important. If the corporate borrower can support debt service from its existing operations, the lender may be willing to fund capex against consolidated credit strength and a general security package. If repayment depends principally on the new asset’s future cash flows, the lender must underwrite construction, commissioning, offtake, utilisation, operating costs, counterparty risk and the project’s ability to stand on its own.

7. Accordion and Incremental Facilities: The Difference Between Capacity and Commitment

7.1 Why borrowers seek an accordion

An accordion feature is intended to give the borrower a route to increase the size of an existing facility or incur additional debt, often to fund future acquisitions, capex or growth. It can be useful where the borrower cannot accurately forecast every future use of capital at the original closing. Instead of renegotiating the entire credit agreement, the borrower may be able to request an increase within a pre-agreed framework.

However, an accordion is not automatically committed money. It may establish a maximum amount of additional debt that can be incurred if the borrower satisfies specified conditions, while leaving the existing lenders free to decide whether they will provide the additional commitments. It may also permit the borrower to raise additional debt from new lenders, subject to pricing, maturity, security and intercreditor conditions. In either case, the provision may give legal capacity to incur debt without guaranteeing that a lender will fund it.

7.2 Committed accordion versus uncommitted accordion

A committed accordion exists only where one or more lenders have accepted a binding obligation to provide the incremental amount, subject to the stated conditions. The lender commitments, allocation, availability period, fees and funding obligations should be explicit. An uncommitted accordion may provide a process for requesting an increase, but the lender is not obliged to participate unless it separately agrees.

The difference should be reflected in the borrower’s financing plan. A committed DDTL can be treated as a source of future funding, subject to its conditions. An uncommitted accordion should normally be treated as a potential financing option, not as a committed source in the base case. A borrower relying on an uncommitted accordion to meet a mandatory acquisition payment or a fixed construction milestone may be exposed to refinancing or liquidity risk if the lenders decline.

7.3 Incremental debt capacity is not the same as incremental lender capacity

Credit agreements may include incremental debt baskets, ratio-based debt capacity, free-and-clear baskets, general debt baskets or other permissions that allow the borrower to incur additional indebtedness. These are debt-incurrence permissions. They do not necessarily oblige existing lenders to provide new money. The borrower may be permitted to seek a new loan from another lender, but that lender must still underwrite the transaction and agree terms.

This distinction is frequently missed in sponsor and promoter discussions. “The facility has a $30 million accordion” may mean that the company can ask for a $30 million increase, or that it has capacity to incur $30 million of incremental indebtedness without breaching negative covenants. It does not necessarily mean that $30 million has been underwritten, committed and reserved. The term sheet and credit agreement should state precisely what has been agreed.

7.4 Future pricing and market risk

A committed DDTL generally gives the borrower greater certainty over future pricing, subject to its agreed pricing grid and adjustment mechanics. An uncommitted incremental facility may need to be negotiated when it is required. The lender’s required spread, original issue discount, maturity, covenants, security position and fees may be different from the terms of the original facility, particularly if the company’s credit profile or market conditions have changed.

The borrower should not assume that the original lenders will be the cheapest source of incremental capital. Nor should it assume that a new lender will accept the original ranking or intercreditor terms. Future capital may be structurally subordinated, secured on a different asset pool, subject to higher pricing or unavailable without existing lender consent. The financing plan should identify these possibilities before the company makes an irreversible commercial commitment.

8. Building the Facility Package Around the Cash-Flow Curve

A sophisticated corporate facility package often combines several instruments. The aim is not to maximise the number of tranches. It is to allocate each type of liquidity requirement to the instrument that can fund it most efficiently and repay it through the most credible source of cash.

A typical structure might include:

  • A term loan or unitranche facility to fund the day-one transaction, refinancing or permanent capital requirement.
  • An RCF to support working-capital fluctuations, letters of credit and ongoing liquidity.
  • A DDTL to fund a defined future acquisition or investment programme.
  • A capex facility to finance staged investment in plant, machinery or expansion.
  • Equipment finance or leasing where specific assets can support separate funding and repayment mechanics.

The following schematic illustrates how the facilities may sit alongside one another:

flowchart TD
    A[Operating company / borrower group] --> B[Revolving credit facility]
    A --> C[Initial term loan / unitranche]
    A --> D[Delayed-draw term loan]
    A --> E[Dedicated capex facility]
    B --> B1[Seasonal working capital, receivables, inventory, LCs]
    C --> C1[Day-one refinancing, transaction funding, permanent debt]
    D --> D1[Future acquisition or discrete strategic expenditure]
    E --> E1[Equipment, installation, construction and commissioning milestones]
    B1 --> F[Repayment from operating-cycle cash conversion]
    C1 --> G[Repayment from enterprise free cash flow]
    D1 --> G
    E1 --> H[Repayment aligned to asset commissioning and cash generation]

The facilities may be provided by one lender, a club or syndicate, or different lender groups. Where multiple providers participate, the transaction requires clear treatment of security sharing, voting rights, payment priorities, mandatory prepayments, maturity dates, permitted additional debt and enforcement. Even where the borrower sees one agreement and one administrative agent, different facility classes may have separate lender voting groups or consent rights.

The correct architecture should be derived from the cash-flow forecast. A facility schedule should show monthly commitments, utilisations, cash interest, unused fees, principal repayment and remaining availability. The model should also identify whether the same source of cash is being assumed to repay multiple facilities. A forecast that uses all surplus cash to amortise term debt while also assuming that the RCF will be repaid from those same collections is internally inconsistent.

9. Sizing the Facilities: The Lender’s and Borrower’s Workplan

9.1 Start with a monthly cash model

For a meaningful facility package, annual financial projections are not enough. Annual accounts can conceal intra-year peaks and troughs. The borrower should prepare a monthly cash-flow model that captures revenue collections, supplier payments, payroll, tax, inventory build, capex, acquisition costs, financing fees, debt service and minimum operating liquidity. For volatile businesses, weekly cash forecasting may be required during the immediate liquidity period.

The model should separately identify:

  1. Structural working capital: the amount of cash permanently tied up in the operating cycle as the business grows.
  2. Seasonal working capital: temporary peaks caused by procurement, production or sales patterns.
  3. Transaction liquidity: one-off funding for an acquisition, refinancing or shareholder-related event, where permitted.
  4. Capital expenditure: staged or recurring investment in productive assets.
  5. Contingency liquidity: additional capacity for reasonable downside needs, cost overruns or timing mismatches.

These categories should not be merged simply because they appear in the same cash forecast. A seasonal peak may be repaid from customer collections. Structural working capital may need permanent funding from equity or term debt. Capex may be repaid over the useful economic life of the asset. An acquisition DDTL may be repaid from the combined group’s cash flow. Each has a different repayment logic.

9.2 Determine the true peak funding requirement

The borrower should calculate peak funding need after incorporating available cash, committed supplier credit, existing facilities, customer advances, deposits and other reliable sources. The analysis should avoid double counting cash that is restricted, trapped in subsidiaries, required to support letters of credit or necessary to maintain minimum operating liquidity.

A lender will also examine the quality of the cash forecast. Does it reconcile to the audited accounts and management accounts? Are collection assumptions supported by customer payment histories? Are capex dates supported by supplier contracts? Are acquisition dates realistic given due diligence and regulatory approvals? Are the forecast margin and working-capital assumptions consistent with the company’s order book and historical experience?

The facility commitment should be sized to meet a credible peak requirement with an appropriate buffer, not to fund every conceivable contingency. Excessive commitments can increase fees and may encourage unnecessary leverage. Insufficient commitments can leave the borrower exposed to a liquidity shortfall precisely when it is most difficult to negotiate new funding.

9.3 Stress the cash curve, not only EBITDA

The company should model delayed customer receipts, lower volumes, inventory build, higher input prices, cost overruns, capex slippage and a longer commissioning period. A business can show positive EBITDA while experiencing a severe liquidity squeeze because receivables are delayed or inventory cannot be sold. Lenders therefore need to test the amount and timing of cash required, not just whether the annual EBITDA forecast remains positive.

For a DDTL or capex facility, the borrower should also test whether the proposed utilisation would breach pro forma leverage or debt-service tests. A facility that is committed today may still be unavailable tomorrow if the contract allows a leverage condition, no-default requirement or material representation to be retested at each draw. The borrower should model the drawdown conditions under the same downside scenario as the cash forecast.

9.4 Identify the repayment source for every tranche

The RCF should normally be repaid through operating cash conversion and the release of working capital. A DDTL should be repaid through the enterprise cash flow, acquisition synergies or other identified source that the lender has accepted. A capex facility should be serviced from the cash generation of the existing business and, where appropriate, incremental cash generated by the funded assets. The lender should not be asked to rely on an uncommitted future refinancing as the only credible repayment source unless it has explicitly underwritten an exit or asset-sale strategy.

10. Availability Periods and Commitment Mechanics

10.1 The availability period is part of the product

A commitment without sufficient availability duration may not solve the business problem. If a manufacturer expects a plant to be delivered in 18 months but the capex commitment expires in 12 months, the facility may be useless for the final and most important payments. If a borrower expects an acquisition pipeline to develop over two years, a DDTL with a six-month draw window may not provide the intended strategic flexibility.

Conversely, a lender may resist keeping undrawn commitments open indefinitely. It has reserved capital, incurred funding and capital costs, and may be exposed to changes in the borrower or market. The availability period is therefore a commercial negotiation involving the expected timing of the use, the lender’s capital reservation and the risk of deterioration before funding.

The agreement should also state whether the commitment terminates automatically at the end of the availability period, reduces as utilisations occur, or may be extended by mutual agreement. Any extension should identify whether the lender has discretion, whether fees increase, and whether credit approval or updated diligence is required.

10.2 Commitment reduction and cancellation

A borrower may want to cancel an undrawn commitment if the project is abandoned or the acquisition does not proceed. The agreement should specify whether cancellation is permitted, whether it is irrevocable, whether a minimum amount applies and whether the borrower must pay any cancellation or break fee. A permanent reduction may lower commitment fees but also remove liquidity that cannot be restored without lender consent.

The borrower should negotiate the ability to cancel unused commitments without unnecessary cost where the underlying expenditure is abandoned or reduced. The lender may reasonably expect compensation for upfront or arrangement fees already earned, capital reserved or costs incurred. The economics should be transparent and reflected in the facility model.

10.3 Draw notice periods and operational readiness

The utilisation notice period can be commercially significant. A multi-lender facility may require several business days for the administrative agent to process a borrowing request, allocate funding shares and arrange settlement. A borrower facing a same-day supplier payment cannot assume that a committed facility can be drawn immediately. The notice period, cut-off times, currency, minimum amount, interest period and payment mechanics should be included in the operational funding plan.

The borrower should also prepare the supporting documents before the draw date. This may include officer certificates, funds-flow memoranda, invoices, engineer certificates, acquisition documents, borrowing-base certificates, compliance certificates and evidence of fees. A facility may be legally committed but operationally inaccessible if the borrower cannot deliver the required documents on time.

11. Conditions to Utilisation and Drawstop Events

A committed facility is not necessarily an unconditional promise to fund. Lender obligations are ordinarily subject to conditions set out in the finance documents. These conditions protect the lender against material deterioration, misuse of proceeds and failure to meet agreed underwriting assumptions. They also determine whether the borrower can rely on the facility with confidence.

Common utilisation conditions include:

  • Delivery of a valid utilisation request within the notice period and during the availability period.
  • No event of default continuing or resulting from the proposed drawing, subject to the precise wording agreed.
  • Repeated representations being true in the manner and to the extent specified in the agreement.
  • Compliance with any pro forma leverage, debt-service or borrowing-base test applicable to the relevant facility.
  • Confirmation that proceeds will be used for an agreed purpose.
  • Delivery of project, acquisition, legal or collateral documentation required for that utilisation.
  • Payment of applicable fees, expenses and any borrower equity contribution.

The distinction between “Default” and “Event of Default” can be important. A facility may prevent further utilisation where a default has occurred and is continuing, even if the relevant grace period has not expired and the default has not yet matured into an Event of Default. The agreed formulation should be read carefully. Borrowers should negotiate objective, workable tests and avoid conditions that allow a lender to refuse funding based on a vague or subjective assessment not contemplated by the credit approval.

A drawstop may apply to all facilities or only to a particular tranche. For example, a borrowing-base deficiency may restrict the RCF while leaving a capex DDTL available, provided the agreement permits that outcome. A leverage test may restrict the DDTL but not the existing revolving availability. Cross-default or cross-acceleration provisions may cause problems across all facilities if a material debt event occurs elsewhere in the group. The interaction must be understood before the company signs.

A DDTL may include conditions that are not present in a standard RCF drawing. These can include a requirement that the original term loan has been fully drawn, a capex or acquisition certificate, a pro forma leverage test, or a requirement to fund the acquisition at or near completion. Proskauer identifies examples of DDTL utilisation conditions including no event of default, repeating representations, a pro forma leverage cap, confirmation of permitted purpose and, in some cases, restrictions on using uncommitted incremental debt before the committed DDTL is used. Proskauer, Private Credit Explained: Delayed Draw Term Loans.

The borrower should test whether each condition can be met at the date the money is actually needed. An overly broad material adverse change condition, an unachievable leverage ratio or a representation that cannot be repeated after an ordinary course event can turn a committed facility into an uncertain source of funding. Equally, the borrower should not expect a lender to fund where the company has materially deteriorated, misapplied proceeds or breached the agreed risk parameters.

12. Commitment Fees, Ticking Fees and the Economics of Undrawn Capital

12.1 The borrower pays for availability, not only for money drawn

When a lender commits capital but the borrower does not draw it, the lender is still reserving capacity. The facility may limit the lender’s ability to deploy the commitment elsewhere and may expose the lender to future funding obligations. The borrower therefore usually pays a fee on undrawn commitments. This may be described as a commitment fee, non-utilisation fee, ticking fee or unused facility fee, depending on the agreement and market convention.

The fee base and start date should be checked carefully. The fee may accrue from the closing date, from a specified date after closing, or after a commitment-fee holiday. It may be payable monthly or quarterly in arrears. It may apply to the entire undrawn commitment or be calculated by reference to an agreed rate, margin or step-up. Some structures also include an upfront arrangement fee, a fee payable as each drawing occurs, or a cancellation fee on amounts that remain unused.

A fee that appears small as a percentage can become material when applied to a large commitment for several years. A $20 million facility with a 0.75% annual unused commitment fee costs $150,000 per year when fully undrawn. If half the commitment remains undrawn for two years, the cumulative amount is still meaningful. The correct comparison is not simply “interest is payable only when drawn”; the borrower must compare interest on funded amounts, commitment fees on undrawn amounts, upfront fees, amendment fees, legal expenses and any cancellation cost.

12.2 Illustrative cost calculation

Assume a borrower has a $20 million DDTL, an annual interest rate of 10.0% on drawn amounts and a 0.75% commitment fee on undrawn commitments. The borrower draws $10 million after six months and the remaining $10 million after twelve months. For simplicity, assume the first $10 million is drawn on the first day of month seven, the second draw occurs at the end of month twelve, and no principal is repaid in the first year.

Component Simplified calculation Year-one cost
Interest on first $10m draw $10m × 10.0% × 6/12 $500,000
Commitment fee on undrawn amount $20m × 0.75% × 6/12 + $10m × 0.75% × 6/12 $112,500
Total Interest plus commitment fee $612,500

This is an illustrative gross financing-cost calculation, not a market quote. It excludes upfront fees, legal fees, tax, benchmark changes, minimum fees and any other financing costs. It also does not assume an alternative investment return on cash that would have been received if the borrower had drawn the full commitment on day one. The comparison should be made on a net basis after considering what the borrower would earn on surplus cash, the cost of holding liquidity and the operational risk of having funds available only when the draw conditions are met.

The commercial point is that a DDTL can materially reduce the gross interest burden compared with drawing all future capital immediately, but the borrower pays a price for keeping the commitment open. The facility is most attractive when the value of funding certainty and avoided cash drag exceeds the commitment and arrangement fees.

12.3 Revolver fees and letter-of-credit economics

An RCF may involve a commitment fee on undrawn amounts, interest on cash drawings, letter-of-credit fees, fronting fees, swingline fees, agency fees and other ancillary charges. Some facilities calculate the used commitment by reference to revolving loans and letter-of-credit exposures. A borrower should therefore model cash drawings and non-cash usage together. A $15 million commitment that supports $8 million in cash drawings and $4 million in outstanding letters of credit is not equivalent to $7 million of free cash availability.

12.4 Fee negotiation should reflect actual commitment risk

The fee should be negotiated in context. The lender may seek a higher commitment fee where it reserves capital for a long period, where the facility is heavily conditional, where a narrow lender group cannot readily syndicate or hedge its exposure, or where the borrower has substantial optionality. The borrower may seek a lower fee where the draw period is short, the use of proceeds is certain, the commitment is subject to extensive conditions or the lender also receives an arrangement fee and margin on utilisation.

A fee holiday can be valuable where the borrower is unlikely to draw immediately. A staged commitment fee can align the cost to the lender’s actual capital reservation period. A pro rata arrangement fee paid on each utilisation may reduce the amount payable if the facility is never used, although the lender may seek a minimum or cancellation fee. These points are commercial negotiations; there is no single mandatory market formula.

13. Repayment, Amortisation and Maturity Must Follow the Facility’s Purpose

A facility can be correctly sized and priced but poorly amortised. Repayment terms must reflect how the cash requirement is expected to reverse or how the funded asset is expected to generate cash.

An RCF is commonly repaid as operating assets convert into cash, with the borrower permitted to redraw during the availability period. The principal balance may fluctuate significantly. At maturity, any outstanding balance must be repaid, refinanced or otherwise addressed. The borrower should not assume that a revolving line will automatically renew because the business remains profitable. A maturity concentration can create a liquidity cliff if the operating cycle is still using the line when the commitment expires.

A DDTL is term debt. Each draw may have its own interest accrual date, amortisation date or conversion date, depending on the agreement. Some facilities begin amortising on each drawing; others provide that each drawing converts into an amortising term loan after a defined period or milestone. Some agreements place all draws on a common maturity date. The borrower should ensure that a late drawing does not leave an inappropriately short repayment period, or that an early drawing does not enjoy an unintended extension compared with the rest of the debt.

A capex facility may provide an availability or construction period followed by amortisation. Repayment can begin after installation or commissioning, after a specified conversion date, or according to a schedule that reflects the useful life of the asset. The lender will want to avoid excessive bullet repayment, while the borrower will want principal to be serviced from the cash flow the asset can reasonably generate. If the asset requires a long qualification period, the debt schedule should account for that delay without relying on an unrealistic refinancing assumption.

The following simplified repayment map illustrates the distinction:

Facility Typical repayment source Typical principal mechanics Key maturity risk
RCF Operating-cycle cash conversion Fluctuating balance; repay and redraw during availability Outstanding balance due at facility maturity; renewal not automatic
DDTL Enterprise cash flow or identified transaction benefit Staged draw, then amortisation or bullet repayment; normally no redraw Late drawings, bullet concentration and insufficient time to amortise
Capex facility Existing and incremental cash flow from the business or funded asset Staged utilisation followed by amortisation or conversion to term debt Commissioning delay, cost overrun, ramp-up failure or repayment before cash generation

The agreement should also specify how voluntary and mandatory prepayments are applied among facilities. If surplus cash is applied first to the DDTL, the borrower may lose future committed availability because the repaid amount cannot be redrawn. If it is applied first to the RCF, working-capital availability may be restored. If capex debt and the term loan share security, the prepayment waterfall may affect lender economics and priority. The order of application should be negotiated rather than assumed.

14. Security, Borrowing Bases and the Asset Perimeter

The security package should follow the facility’s underwriting basis. A cash-flow RCF may rely on the general enterprise security package and guarantees. An asset-based RCF may require first-ranking security over receivables, inventory, bank accounts and proceeds, together with reporting, appraisals, field examinations and cash dominion. A capex facility may take security over the funded equipment, related proceeds, insurance and warranties, although the lender may also require a wider group security package. A DDTL may rank pari passu with existing term debt or have a separate priority arrangement, depending on the agreed structure.

The lender must identify the actual asset owner and the jurisdiction where the asset is located. Equipment installed in one country may require local security registration, title review or notice. A receivables assignment may be restricted by contract or local law. An account control agreement may be required for cash security. Security documents and perfection steps must be reviewed by local counsel in each relevant jurisdiction. A single English-law facility agreement does not automatically create or perfect security over assets located elsewhere.

Borrowing-base eligibility is particularly important for asset-based revolvers. The borrower should understand the difference between gross book receivables and eligible receivables. Amounts that are overdue, disputed, contra, owed by affiliates, concentrated in one customer, subject to set-off or payable by a weak debtor may be excluded or discounted. Inventory may be ineligible if obsolete, work-in-progress, located at an unapproved site, consigned, subject to title retention or difficult to liquidate. The borrower should not size its funding model by applying an advance rate to the total balance-sheet value of current assets without testing the detailed eligibility rules.

A capex lender should also consider whether the financed asset can be separately identified and recovered. Specialist machinery may have strong replacement value but a limited resale market. Its value may depend on the factory layout, software, tooling, spare parts and trained operators. The lender may therefore give the asset a lower collateral value than the invoice price. The primary repayment source should remain cash flow unless the facility is genuinely structured as an asset-backed loan with an enforceable and workable recovery path.

15. Interaction Between Facilities: Priority, Prepayment and Covenant Design

Where one agreement contains multiple facilities, the parties must decide whether the facilities share the same security, whether they rank pari passu, and how lender voting operates. A single lender may provide all tranches but still maintain separate facility classes and internal commitment allocations. A syndicated or club structure may involve different lenders for the RCF, DDTL and capex facility. Each arrangement creates different coordination and conflict risks.

Key points include:

  • Security sharing: do the facilities share the same security and guarantees, or does one tranche have a separate asset package?
  • Payment priority: are scheduled and mandatory prepayments allocated pro rata, first to a designated tranche or in a stated waterfall?
  • Voting: do all lenders vote together, or do revolving lenders, term lenders and capex lenders have separate class consent rights for matters affecting their commitments?
  • Maturity: do all tranches mature together, or does one facility create an earlier refinancing requirement?
  • Incremental debt: can the borrower incur additional debt, and will the new debt share the existing security or be structurally or contractually subordinated?
  • Drawstop: does a problem in one facility stop utilisation under all facilities, or only the affected tranche?
  • Cancellation: can the borrower cancel one undrawn commitment without terminating the entire financing package?

An example of a publicly filed U.S. credit agreement illustrates how this can work in practice. Core Molding Technologies’ amended credit agreement documented separate revolving, term and CapEx/Delayed Draw facilities. Its revolving loans could be borrowed, prepaid and reborrowed; the term loans were single funded advances and could not be reborrowed; and the CapEx/Delayed Draw facility had its own availability, utilisation and repayment provisions. The agreement also provided for unused facility fees on undrawn revolving and capex/delayed-draw commitments. This is an example of one negotiated facility package, not a universal market template. SEC filing, Core Molding Technologies, Third Amendment to Credit Agreement, 2 July 2026.

The example is instructive because it shows that an agreement can contain facilities with different economic and legal mechanics while operating under one financing framework. It also demonstrates why the borrower should not assume that all commitments share the same conditions, repayment terms or utilisation rights simply because they are contained in one document.

16. Underwriting the Commitment: What the Lender Is Really Approving

A lender that approves a revolving facility is underwriting the borrower’s ongoing liquidity needs, operating cycle, cash conversion, collateral or cash-flow support and ability to repay the facility at maturity. It is not merely approving a maximum loan amount. A lender that commits a DDTL is underwriting both the borrower’s present credit and the future circumstances in which the delayed drawing will occur. It must be satisfied that the borrower is likely to remain creditworthy, that the use is sufficiently defined, and that the funding conditions are objective and manageable. A capex lender is additionally underwriting project execution, asset eligibility, cost-to-complete, timing and the relationship between the draw schedule and repayment capacity.

The credit committee should assess at least five dimensions.

First, the borrower and group. The lender must identify the correct borrower, guarantors, obligors and asset owners. It must understand existing indebtedness, contingent liabilities, leases, tax exposures, intercompany arrangements and any restrictions on upstreaming cash. The consolidated group may generate the cash, but the contractual borrower must have legal access to it.

Second, the purpose and funding schedule. The lender should receive a defined uses schedule, project budget, acquisition timetable or working-capital analysis. For capex, the schedule should identify the suppliers, equipment, milestones, deposits, expected delivery dates and cost-to-complete. For an acquisition DDTL, it should identify the type of permitted acquisition, leverage test, pro forma financials and any specific transaction conditions.

Third, the cash flow and downside. The lender should test the borrower’s capacity to service the debt after each expected draw. It should examine sensitivity to delayed collections, higher input prices, weaker margins, capex overruns, delayed commissioning and additional debt. If a DDTL can be drawn only while leverage remains below a fixed threshold, the lender should test whether the business is likely to satisfy that condition under a realistic downside case.

Fourth, the lender’s commitment and operational ability to fund. The legal obligation must be clear. The facility should specify the lender’s several or joint obligations, funding shares, administrative agent mechanics, defaulting lender arrangements and the treatment of funding failures. In a syndicated facility, the borrower may be exposed to the risk that one lender does not fund even though others do. The documentation should allocate that risk.

Fifth, post-draw monitoring. The lender should receive appropriate financial information, compliance certificates, borrowing-base certificates, capex reports, project updates and covenant tests. The required frequency should be proportionate to the facility and collateral risk. The EBA’s Guidelines on Loan Origination and Monitoring provide a useful supervisory reference for institutions within their scope: they address credit governance through the lifecycle of facilities, including creditworthiness assessment and ongoing monitoring. The Guidelines are not a universal rulebook for all private-credit funds or non-bank lenders. European Banking Authority, Guidelines on Loan Origination and Monitoring.

17. Common Structuring Errors and How to Avoid Them

17.1 Treating an accordion as guaranteed future money

This is one of the most consequential mistakes. The borrower includes a potential $20 million accordion in its financing plan and then commits to an acquisition or capex programme on the assumption that the funding will be available. If the accordion is uncommitted, the lender may decline to provide the additional amount or may require a new credit approval and different pricing. The remedy is to identify the commitment status clearly and obtain binding funding commitments where future liquidity is essential to the transaction.

17.2 Using a DDTL for recurring working capital

A DDTL may appear attractive because it offers delayed access to capital without full day-one interest. But if the business repeatedly needs to draw, repay and draw again as invoices are collected and new inventory is purchased, a non-revolving term facility is a poor fit. Repayment may permanently reduce the amount available. The business may need an RCF, borrowing-base facility or combination of revolving and term debt.

17.3 Using an RCF to finance permanent capex

A revolver can technically fund capex if the permitted-purpose clause allows it, but that does not make it the best structure. A permanent asset may generate cash over ten years, while the revolving commitment may mature in three or five years and be subject to renewal risk. If the RCF remains drawn to finance machinery, the company may face a refinancing event before the asset has generated sufficient cash. A term or capex facility may be better aligned.

17.4 Assuming that commitment means unconditional funding

Every committed facility contains conditions. The problem arises when those conditions are not sufficiently understood, are too broad, or cannot be satisfied in the circumstances when funding is required. The borrower should negotiate a realistic draw process, objective tests and a clear distinction between initial conditions precedent and repeating utilisation conditions.

17.5 Ignoring the fee on undrawn capital

A large undrawn commitment can carry material fees. If the borrower obtains a $40 million DDTL and draws only $5 million, the commitment fee may become a significant part of the financing cost. The commitment should be sized against a realistic use schedule and the borrower should negotiate a fee holiday, staged commitments or cancellation rights where justified.

17.6 Failing to align amortisation with commissioning

Capex debt that amortises before the asset enters commercial operation can create cash strain at exactly the point when the business is absorbing installation and ramp-up costs. The parties should agree the availability period, conversion date, grace period and amortisation schedule with reference to the project’s actual delivery and commissioning programme.

17.7 Forgetting that non-cash facilities consume liquidity

Letters of credit and guarantees may reduce available RCF capacity even though no cash loan has been drawn. If the company assumes that its entire revolver is free for cash borrowing, it may discover a shortfall when suppliers require an LC or a project owner requires a performance guarantee. The utilisation model should include all contingent exposures.

17.8 Leaving the future funding requirement to be negotiated after the business commits

A company may sign a supplier contract, acquisition agreement or construction contract before securing a reliable funding route. It then approaches lenders under time pressure, with little ability to negotiate pricing or conditions. The better practice is to obtain committed financing, or at least a realistically executable financing plan, before taking on a binding expenditure obligation.

18. Worked Transaction: A $50 Million Facility Package for an Industrial Business

The following is a hypothetical illustration. It is designed to demonstrate facility architecture and financing economics, not to describe an actual borrower, lender offer or completed transaction.

18.1 The business situation

Aster Industrial Components Ltd. is an established manufacturer with annual revenue of $140 million and EBITDA of $19 million. The company has a growing export order book, a seasonal inventory build and a plan to expand production capacity. It is also evaluating a bolt-on acquisition to add a complementary product line and customer base.

The company’s financing requirements are not all immediate. It needs working-capital availability throughout the year, it expects a potential acquisition to complete in approximately nine months, and it plans to fund capex in three stages over 18 months. Management estimates the peak seasonal working-capital requirement at $14 million, the acquisition funding requirement at $12 million, and the capex programme at $20 million.

Rather than borrow $46 million at closing, the company proposes a package comprising an $18 million RCF, a $12 million DDTL for the acquisition and a $20 million capex facility. Total committed capacity is $50 million. The $4 million headroom over the identified uses is intended to provide a limited operating buffer and should be tested against lender risk appetite and the company’s liquidity policy.

18.2 Proposed facility structure

Facility Commitment Purpose Proposed availability Repayment character
RCF $18m Seasonal inventory, receivables and general working capital 3 years, subject to agreed maturity and draw conditions Revolving; repay and redraw during availability
Acquisition DDTL $12m Permitted bolt-on acquisition and agreed transaction costs 18 months Term debt once drawn; no re-borrowing after repayment
Capex facility $20m Three-stage production expansion programme 24 months Staged advances; converts to amortising term debt under agreed schedule
Total commitments $50m

The RCF is underwritten against the company’s working-capital cycle and consolidated repayment capacity. The acquisition DDTL is committed from closing but may be used only for a permitted acquisition meeting the agreed leverage and documentation conditions. The capex facility is available for specified equipment, installation and commissioning costs, with drawings supported by agreed documents. The capex facility is not assumed to be a project-finance loan; repayment is supported by the existing company and the incremental cash flow expected from the expansion.

18.3 Staged utilisation schedule

Timing RCF Acquisition DDTL Capex facility Aggregate drawn debt
Closing / month 0 $6m - $5m $11m
Month 6 $14m - $5m $19m
Month 9, acquisition completion $12m $12m $5m $29m
Month 12 $9m $12m $12m $33m
Month 18, after third capex milestone $10m $12m $20m $42m
Seasonal peak stress $18m $12m $20m $50m

The table is an illustrative sequence, not a claim that every borrower will follow this profile. The RCF balance fluctuates as working capital is funded and collected. The acquisition DDTL is drawn when the acquisition completes. The capex facility is drawn as the project reaches the agreed milestones. The company does not incur interest on the full $50 million from the closing date, but it does pay the agreed commitment fees on undrawn amounts and must satisfy utilisation conditions before each draw.

18.4 Capex milestones and documentation

The $20 million capex facility is divided into three agreed stages:

Stage Amount Illustrative milestone evidence
Stage 1 $5m Supplier deposit, approved purchase order and evidence of borrower contribution
Stage 2 $7m Equipment delivery, inspection report and supplier invoice
Stage 3 $8m Installation and commissioning certificates, agreed completion tests and final invoices

The lender should agree in advance whether payment is made directly to suppliers or through the borrower. It should also agree the treatment of taxes, duties, freight, installation, cost overruns, supplier refunds and replacement equipment. If the project changes materially, additional utilisation should be subject to an agreed change-control process rather than an open-ended lender discretion.

18.5 Illustrative first-year financing cost

For illustration, assume an average RCF balance of $9 million at 9.0%, an average undrawn RCF balance of $9 million carrying a 0.40% unused commitment fee, an average DDTL balance of $2 million at 10.0% with $10 million average undrawn and a 0.75% commitment fee, and an average capex drawing of $6 million at 10.0% with $14 million average undrawn and a 0.75% commitment fee.

Facility Average drawn Interest rate Average undrawn Commitment fee Approx. annual cost
RCF $9m 9.0% $9m 0.40% $846,000
Acquisition DDTL $2m 10.0% $10m 0.75% $275,000
Capex facility $6m 10.0% $14m 0.75% $705,000
Total $17m $33m $1,826,000

The RCF cost comprises $810,000 of interest and $36,000 of unused fee. The DDTL cost comprises $200,000 of interest and $75,000 of commitment fee. The capex facility cost comprises $600,000 of interest and $105,000 of commitment fee. These figures exclude arrangement fees, legal costs, letter-of-credit fees, tax and other financing costs. They use simplified annual average balances and are not a substitute for a monthly debt schedule.

The illustration shows that a staged financing package can reserve a substantial amount of future liquidity while avoiding interest on the entire commitment from day one. It also demonstrates that the price of unused availability must be modelled. If the company expects to leave a large portion of the capex commitment undrawn for several years, it should examine whether the commitment should be staged, reduced or replaced with a shorter availability window.

18.6 Credit analysis and downside conditions

The lender should not approve the package solely because the facilities are individually conventional. It must assess the combined exposure after each draw. The acquisition may increase leverage before anticipated synergies are realised. The capex project may run late. The RCF may remain near its seasonal peak if collections deteriorate. The company may therefore satisfy the opening leverage test but fail a subsequent utilisation test unless the terms and conditions are carefully designed.

For this hypothetical borrower, management estimates annual cash flow available for debt service of $12.5 million in the base case after tax, maintenance capex and normalised working-capital movements. At the expected fully deployed debt profile, the lender models cash interest and scheduled principal of $7.7 million, giving an illustrative DSCR of approximately 1.62x. Under a downside case, CFADS falls to $9.0 million while debt service remains approximately $7.7 million, reducing DSCR to approximately 1.17x. These illustrative figures indicate that the transaction may be financeable only if the leverage, capex ramp-up and working-capital assumptions are credible and the lender has sufficient covenant and liquidity protection. They are not market underwriting thresholds.

The lender should also test the RCF maturity. If the RCF remains fully drawn at the end of its three-year availability period, the company must be able to repay it through cash conversion, a committed replacement facility or another reliable source. It should not rely on the assumption that the bank will renew the commitment automatically. The DDTL and capex loans require separate amortisation schedules and a clear path to repayment.

18.7 What the case demonstrates

The package succeeds because each facility is assigned a distinct commercial purpose. The RCF follows the operating cycle. The acquisition DDTL provides committed capital for a future transaction without forcing the company to carry the entire amount from day one. The capex facility funds eligible expenditure as project milestones are achieved. The company receives financing certainty, while the lenders retain protection through defined purposes, utilisation conditions, fees, covenants and monitoring.

If the borrower had instead drawn all $50 million at closing, it would have paid interest on amounts not yet required and might have held excess cash for months. If it had relied on a general promise to arrange future debt, the acquisition and capex programme would have been exposed to funding-market risk. If it had used only the RCF, the company could have funded permanent capex with a facility that may mature before the new assets produce sufficient cash. The multi-facility structure is therefore not complexity for its own sake; it is an allocation of liquidity rights to the underlying cash demands.

19. India-Specific Considerations: Do Not Import an RCF Template Without Reviewing the Local Banking Framework

International financing terminology is not necessarily identical to local banking products. In India, commercial borrowers may use cash-credit, overdraft, working-capital loan and other bank credit structures that have their own regulatory and operational features. A cash-credit facility under the RBI’s Commercial Banks - Credit Risk Management Directions is defined as a running account permitting advances up to a limit against specified security, with drawing power periodically determined by reference to eligible current assets. An overdraft is defined separately as a facility that permits drawings beyond the credit balance in an account. These definitions should not be casually equated with every feature of an English-law or U.S.-style revolving credit facility.

The RBI’s Commercial Banks - Credit Risk Management Directions, 2025, as updated on 1 October 2026, apply to the commercial banks specified in those Directions. The accompanying Commercial Banks - Credit Facilities Directions, 2025, also contain product- and sector-specific requirements. The applicable framework must be reviewed for the particular lender, borrower, facility and purpose. A foreign private-credit loan, an Indian bank cash-credit facility and an offshore syndicated RCF should not be assumed to have identical regulatory treatment or operating mechanics.

For Indian borrowers, the transaction team should examine the treatment of working-capital facilities, drawing power, current-account operations, security registration, cash flows, end-use, foreign exchange, lender eligibility and any sector-specific project or capex requirements. The local framework can change how availability is calculated, how accounts are operated, what the lender can monitor and how the facility is documented. The relevant RBI Directions should be reviewed in their current form at the time of structuring. RBI, Commercial Banks - Credit Risk Management Directions, 2025, updated 1 October 2026; RBI, Commercial Banks - Credit Facilities Directions, 2025, updated 1 October 2026.

This section is not a summary of all Indian working-capital regulation. It is a reminder that global facility labels must be translated into the local legal and regulatory system rather than imported without adjustment.

20. Documentation and Negotiation: The Clauses That Determine Whether the Facility Works

An experienced transaction team should focus on the operative provisions that determine funding certainty and practical availability. The following points should be settled in the term sheet and then implemented consistently in the definitive documents.

Negotiation point Borrower concern Lender concern Required outcome
Commitment status Is the facility actually committed? Is the obligation clearly limited to agreed conditions? Explicit funding obligation and lender allocation
Availability period Will the money remain available until the expenditure date? How long must capital be reserved? Period aligned to project or transaction timetable
Permitted purpose Can the facility fund the actual expenditure? Is use sufficiently controlled? Clear categories and objective evidence
Utilisation conditions Can each draw be made without a fresh credit process? Has credit materially deteriorated? Defined CPs, no-default and repeated-representation tests
Minimum draw Can small invoices be funded? Can the lender administer multiple small drawings? Practical minimums and aggregation mechanics
Commitment fee Is the unused cost proportionate? Is capital reservation adequately compensated? Transparent rate, base, accrual date and payment schedule
Cancellation Can unused capital be removed at reasonable cost? Is the lender compensated for commitment and costs? Agreed termination, reduction and fee mechanics
Repayment profile Does amortisation match cash generation? Does principal reduce at a prudent pace? Draw-specific or conversion-based repayment schedule
Maturity Is there enough time after the final drawing? Is the final repayment date acceptable? No unintended short tenor or refinancing cliff
Cross-facility drawstop Can one issue block all liquidity? Does deterioration justify stopping further exposure? Carefully scoped facility-specific and cross-default provisions
Additional debt Can future facilities be raised? Will priority and leverage be diluted? Clear debt baskets, security sharing and consent process
Information Are reporting requirements operationally deliverable? Can exposure and collateral be monitored? Proportionate reporting, certificates and audit rights

A good term sheet should not state merely that a DDTL of $20 million is “available for capex”. It should identify the borrower, the lender commitment, availability period, permitted capex, minimum utilisation, fee mechanics, draw conditions, amortisation or conversion mechanics, maturity, ranking and treatment of unused amounts. The same discipline applies to an RCF and any accordion.

The borrower should also require a coherent funds-flow and operational process. Who receives the utilisation request? Which time zone determines the deadline? How many business days are required? What documents must be delivered? Which account receives the proceeds? How are letters of credit treated? What happens if one lender fails to fund? These are not administrative details. They determine whether the borrower can meet a supplier payment, complete an acquisition or avoid a project delay.

21. Strategic Takeaways for Institutional Underwriters and Corporate Promoters

A facility package should be assessed as a financing system, not as a list of products. The RCF, DDTL and capex facility may each be correctly drafted in isolation but still produce an unsuitable capital structure if their combined maturity, draw conditions, repayment schedules and security arrangements are inconsistent.

For corporate promoters, the priority is to secure committed availability before entering into binding commercial obligations, while avoiding the cost of drawing capital earlier than required. The promoter should understand how each facility behaves after repayment, what fees accrue when it remains undrawn, what events stop further utilisation and whether the maturity profile matches the life of the funded asset or operating requirement.

For institutional lenders, the priority is to underwrite the full life-cycle exposure. A commitment is a present credit decision about a future funding obligation. The lender should assess what the borrower is likely to look like when the funds are drawn, how the use of proceeds will affect leverage and cash flow, and whether the agreement contains practical controls to prevent misuse or deterioration. The risk of an undrawn commitment should not be dismissed simply because no principal has yet been advanced.

For transaction advisers and originators, the value lies in understanding the underlying cash requirement and matching it to a provider’s actual mandate. A lender that provides acquisition DDTLs may not want a borrowing-base revolver. An asset-based lender may be comfortable with receivables and inventory but not with a long-dated capex programme. An equipment financier may fund machinery but not payroll or acquisition consideration. Mandate fit must be tested at the level of the facility and use of proceeds.

The following principles should govern the structuring process:

  1. Separate recurring liquidity from permanent capital. A facility that revolves should support a genuinely revolving need; permanent assets should normally receive term-matched financing.
  2. Secure future commitments before they become urgent. An uncommitted accordion or incremental debt basket is not a substitute for a binding funding commitment.
  3. Model the full cost of availability. Include interest, commitment fees, arrangement fees, letter-of-credit costs, cancellation fees and legal expenses.
  4. Align draw conditions with commercial milestones. Utilisation requirements should protect lenders without making the facility unusable when expenditure becomes due.
  5. Match amortisation to cash generation. A capex facility should not force repayment before the funded asset has a reasonable opportunity to become productive.
  6. Model all facilities together. Their aggregate debt service, covenant headroom, maturity and cash waterfall must remain sustainable under downside conditions.
  7. Treat legal and regulatory execution as part of the financing design. The borrower, lender, collateral, account structure, currency and use of proceeds may be governed by different jurisdictions and regulatory requirements.

22. Institutional Advisory Disclaimer

This research briefing is produced by Bayswater Transflow for institutional lenders, investment managers, corporate promoters, business owners and professional intermediaries. It is intended for general commercial and educational purposes and does not constitute legal, tax, accounting, regulatory, investment or financing advice. It does not constitute an offer, commitment or arrangement to provide credit, and no facility described or illustrated in this briefing should be treated as evidence that any lender is willing or able to provide financing to a particular borrower.

The facility structures and financial models are illustrative. Actual availability, utilisation conditions, pricing, fees, amortisation, security, lender commitments and repayment terms are negotiated transaction by transaction and depend on the borrower, lender, instrument, jurisdiction, collateral and applicable regulatory framework. The examples do not represent market quotes or completed transactions. Any transaction must be assessed using current financial information, definitive documentation and appropriate diligence.

Legal, regulatory, tax, accounting, exchange-control, security and insolvency matters must be reviewed by appropriately qualified professionals in each relevant jurisdiction. Regulatory materials and supervisory guidance referred to in this article apply only within their stated scope. No legal or regulatory proposition should be treated as a universal rule merely because it is discussed in a cross-border financing context.

Bayswater Transflow acts as an independent transaction origination and structuring platform. It does not provide balance-sheet lending, manage investment funds, hold client money or guarantee financing outcomes. Any engagement, activity, introduction or transaction-linked remuneration arrangement must be assessed against the actual facts and the legal and regulatory requirements of the relevant jurisdictions.

23. Research References and Further Reading

Regulatory and supervisory materials

Transaction and market-structure materials

The references above are research materials, not substitutes for review of current facility documentation, lender policy or local professional advice. Market conventions evolve, and the terms of any specific credit agreement may differ materially from the examples cited.

Related Mandate Sectors
Corporate CreditRevolving Credit FacilitiesDelayed-Draw Term LoansCapex FinanceCommitted LiquidityPrivate CreditWorking Capital

Institutional Research Notice: This market intelligence briefing is prepared for professional counterparties, fund managers, and corporate promoters. It does not constitute investment advice, an offer to buy or sell securities, or an underwriting commitment.

To discuss this transaction archetype or mandate parameters confidentially, contact our desk at patrimony@bayswatertransflow.com.

Important Disclosure
Information

Past performance and illustrative structures do not predict future returns or guarantee transaction completion. There can be no assurance that any potential mandate will achieve intended commercial terms or that counterparties will proceed to definitive execution. All commentary discusses broad commercial, industry, or sector situations and is provided for institutional information only.

Bayswater Transflow Ltd is an independent corporate advisory and transaction origination firm registered in England and Wales (Company No. 16277213). It is not authorised or regulated by the Financial Conduct Authority (FCA) and does not conduct regulated investment business, hold client money, arrange regulated activities, or advise the retail public on investments. Definitive documentation and regulated decisions remain exclusively with authorised counterparties and appointed professional counsel.

Next step

Engage With Our Intelligence Desk

Register your institutional mandate parameters or discuss transaction structuring confidentially.

Initiate Consultation →